pci网卡rtl8139在novell3.12中安装方法:

pci网卡rtl8139在novell3.12中安装方法:
copy a:\netware\server\312\nbi31x.nlm c:\server
copy a:\netware\server\312\msm31x.nlm c:\server
copy a:\netware\server\312\ethertsm.nlm c:\server
copy a:\netware\server\312\rtssrv.lan c:\server
编辑autoexec.ncf
load c:\server\rtssrv.lan board=1 name=first802

frame=ethernet_802.2
load c:\server\rtssrv.lan board=1 name=first803

frame=ethernetF_803.3
bind ipx to first802 net=222222
bind ipx to first803 net=333333
上面完成后,重启服务器出现:
Loading module Rtssrv.lan
Realtek Fast Ethernet Driver
Version 3.29 June 26,2000
(C)Copyright 2000 Realtek Co.all Rights REserved.
Auto-loading module Ethertsm.nlm
novell Ethernet Topology speeific module
Version 3.61 December 8,1997
(C)copyright 1990-1997,by novell,Inc.all rights

reserved.
Auto-loading module msm31x.nlm
Notice:module name is msm.nlm no msm31x.nlm
novell Generic media support module
Version 3.71 December 2,1997
(C)copyright 1990-1997,by novell,Inc.All rights

reserved.
Auto-loading module nbi31x.nlm
Notice:module name is nbi.nlm not nbi31x.nlm
netware bus interface
Version 1.65 October 17,1997
copyright 1997 novell,Inc All rights reserved.
Warning:This Version of netware does not support

protected mode Bios accesses. Without a loader patch
Some pci drivers may fail.
supprted slot values are 10001
slot:10001(这里不知要不要改,好想改了也不行)直接回车
The Cable may be disconnected to your board.
Halfdaplex environment,Linespeed:10M
Hardware setting:slot 10001,I/O ports C000h to

CoTFh,Interrupt Bh
Ipx Lan protocol bound to Realtek Fast Ethernet Driver
loading moudle Rtssrv.lan
Specified frame type in not cupported and was ignored
Do you want to add frame type for a previously loaded

board?n
上面如何直接回车出现:
FATAL:Attenpt to reinitialize re-entrant module FAILED
LAn Driver FIRST803:is not loaded
total server memory:16.000 kilogytes.
novell netware v3.12(250user)8/12/93
(c)copyright 1983-1993 novell Inc.
All Rights Reserved.
Patent Pending-novell,Inc.
Tuesday Febraary 3.1902 12:23:04 pm
student:
上面如何输入Y则出现:
supported frame types for rtssrv using slot 10001,I/O

port C000h to C0TFh,Inte rrupt Bh are:
1.ETHERNET_II
2.ETHERNET_802.3
3.ETHERNET_SNAP
select new frame type:随便选一个出现:
Previonsly loaded module was used re_entrantly
IPX LAn protocol bound to Realtek Fast Ethernet DRiver
Total server memory:16,000 kilobytes
novell netware v3.12(250user)8/12/93
(c)copyright 1983-1993 novell Inc.
All Rights Reserved.
Patent Pending-novell,Inc.
Tuesday Febraary 3.1902 12:23:04 pm
student:
以上问题不知是什么问题,请高手指点一下!小弟先谢了!

我的问题就没有人碰到过!

时间久了有些忘记,不过中间有些过程没有仔细研究,但我的服务器与工作站一切正常。应该是8139与主板的PNP的支持问题!

有时间我在来发表一份新的。

楼上兄弟,谢了,我在等着呢?要么你把的autoexec.ncf贴出来看看!

OK ,晚上见

楼上兄弟,问题解决不过又有新问题了?
f:
login supervisor
运行syscon
Getmessage unable to access the system file"Sys$msg.dat"
The system message file is probably not the most current version.

autoexec.ncf

load c:\pcisrv.lan prame=ethernet_802.3 name=ok slot=1
bind ipx to ok net=11
load c:\nbi31x
load c:\pcisrv
bind ipx to pcisrv
load rpl
bind rpl to pcisrv net=11
mount all
bind rpl to pcisrv
load monitor

上述是今天我用RTL8029作的实验,RPL成功联接,无盘下的FOXPRO订单系统工作正常。

我没有遇到过这个毛病,不知是不是你的系统有缺损,还是是你的IPX或者是NETX版本不对

楼上兄弟,能否帮忙问问?

换张光盘,或换个版本,应是IPX的问题,NOVELL 3.X换用IPXODI工作站配置,就没有这个问题了。并且在8139或8029软盘里都有这些文件,替代就可以。

谢了,我今晚试试!

yicomputer兄,不行啊,你说把ipxodi.com工作站的配置,是什么意思!我在安装novell3.12安装程序中copy ipxodi.com a:\就启动不了,你能不能具体一点,还有就是实在不行的话,你能不能上传一个novell3.12完整,九口上的不完整,只能装服务器,不能copy public这一项输入的路径也找不到源文件,虽然也有一个public.zip下载后,指定路径也不行,我自己卖的指定路径就可以了!可版本。。。。麻烦你了!